Electrodes

Fleetweld 5P (E6010) — can be used for welding on dirty, rusty, greasy or even painted steel surfaces that are difficult to clean.

Fleetweld 5P+ (E6010) — is analogous to Fleetweld 5P, but offers improved welding properties for quick arc striking, easier slag removal, and improved bead appearance.

Shield–Arc 85 (E7010–A1) — is an all–position stick electrode for vertical down and vertical up welding
on 0.5% molybdenum pipe steels and from API 5L X42 to X65 line pipe.

Shield–Arc HYP+ (E7010–P1) — was developed for vertical down welding on X52 to X56 pipe.

• Minimizes pockets.
• Practically eliminates tendency for pin holes during fill and cap passes.

Shield–Arc 70+ (E8010–G) — provides for easy vertical down welding on pipe from X56 to X70 with steels containing up to 0.3% silicon.

Shield–Arc 80 (E8010–G) — is analogous to Shield Arc 70+ but provides for higher impact strength.

Shield–Arc 90 (E9010–G) — is analogous to Shield–Arc 80 but features the higher strength required for X80 pipe.

Lincoln 16P (7016) — is designed for root, fill and cap passes in pipeline welding with pipe strength up to 55 kg/mm² (539N/mm²) and for root pass only with pipe strength up to 60 kg/mm² (588N/mm²). This electrode may be used with direct current with both straight and reverse polarity, as well as with alternating current.

Lincoln 18P (8018) — is intended for fill and cap passes in pipeline welding with pipe steels GOST Types
K55 – K60 with a strength limit of 539 – 588N/mm².

The electrode may be used with direct current in both straight and reverse (predominantly) polarity, as well as with alternating current.

Jetweld LH–70 (E7018) — is a general–purpose electrode for welding in all positions. It provides for easy slag removal, high deposit rate, and superior resistance to weld cracking.

Jet–LH 78 MR (E7018) — provides for high tensile strength after thermal tempering.

• Easy to use in all positions.
• Excellent bead appearance.

LH–D Series – These electrodes can be used for any vertical down welding application where low–hydrogen weld metal is required.

LH–D80 (E8018–G) — pipe grades up to and including API 5L Grade X70

LH–D90 (E9018–G) — pipe grades up to and including API 5L Grade X80

LH–D100 (E10018–G) — recommended for API 5L Grade X80 where higher strength pipe is required.

• Great for high strength pipe welding, high deposition rates.
• Specifically designed for vertical down welding of pipe joints — single and multiple pass fillet and butt welds on high strength, medium and high carbon, and low alloy steels.
• Hot–start feature minimizes starting porosity while helping to initiate the puddle.